(Has to be held close to ignition start button to start the vehicle)
Abnormal noise / performance when going over uneven roads / bumps.
(Clunking,Rear,Left)
Steering / Suspension
Inspection Point
Result
Inspector Comments
Stabilizer Bar / Links / Bushings
Stabilizer bar to frame bushings are excessively degraded and loose and/or noisy.
(Rear,Loose,Noisy)
Inspection photos
Inspection Point
Result
Inspector Comments
Undercarriage
Undercarriage front
Undercarriage rear
Undercarriage middle
Undercarriage passenger side
Undercarriage driver side
Interior
Interior trunk compartment
Underhood
Engine compartment
Other
Inspection Point
Result
Inspector Comments
Positive vehicle performance characteristics
Heater and air conditioning performed well
Frequently removed, lost or misplaced item present at the time of inspection
Owner's manual
Wheel lock key for locking lug nuts
Positive test results at time of inspection
Battery passed the health test and terminals are free from corrosion
All OBD2 emissions monitors are ready
Brake fluid water content tests acceptable
Coolant temperature protection level tests acceptable
Frequently removed item present at the time of inspection
Vehicle Emission Control Information (VECI) label is present under hood
Additional inspection photos
Powertrain
Right rear rotor has minor hotspots/rust no pulsation can be felt at time of inspection
Rear show signs of impact damage repairs have been made. Right rear frame rail has minor imperfections it does not appear to be a safety problem at time of inspection. 
Comments
Inspection Comments
All safety components of this vehicle were marked "acceptable" at the time of inspection.
At the time of inspection, all on-board diagnostic (OBD) readiness monitors were ready, the check engine light was operational with key on but not illuminated with engine running, and emissions components were marked "acceptable."
Seller Comments
This vehicle has new cabin and engine air filters. We also changed the oil.
All safety components of this vehicle were marked "acceptable" at the time of inspection.
At the time of inspection, all on-board diagnostic (OBD) readiness monitors were ready, the check engine light was operational with key on but not illuminated with engine running, and emissions components were marked "acceptable."